Re: IML: Budd (y) need some rotors?

[Mike Pittinaro <mechimike@xxxxxxxxx>]

These appear to be correct...I'd check a FSM to see if
the thickness is within allowable limits...allowing
for the fact that a good 0.010" will probably need to
be scraped off to make them usable.

BTW, the Budd calipers are on '67 thru mid '69.  '66
still had drums up front.

--- "V. Scott Senter" <vssenter@xxxxxxxxx> wrote:

>   I have a '68 crown coupe, but I (hope) I don't
> need rotors yet...  Anyone know if these are a fit
> for the '66 to '69 Budd disc brakes?  Ebay item
> 4598425273.  
>    
>  
>
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=4598425273&rd=1&sspagename=STRK%3AMEWA%3AIT&rd=1
>    
>   Scott 
>     Klamath Falls, OR
>      
>   '63 Mayan gold Crown 4-door w/ flightsweep "GG"
>   '68 faded Haze green Crown 2-door (ugly)
>   '70 Poly lime green Town and Country 9-passenger
> w/ factory 440 and dual intake/exhaust (family
> inheritance)
>   '73 baby blue LeBomba 4-door ($1,500 car lot
> special, nearly perfect in and out)  
>   '73 turquoise LeBaroness w/ white leather/top
> 2-door (Turquoise beauty)
> 
> 
> 
> 
> 		
> ---------------------------------
> Yahoo! for Good - Make a difference this year. 


--Mike Pittinaro

"Forsake Inhibitions.
Pursue thy Dreams."


		
__________________________________________ 
Yahoo! DSL ? Something to write home about. 
Just $16.99/mo. or less. 
dsl.yahoo.com 



-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm