Re: IML: 1962 Drive shaft

[FltSgt@xxxxxxx]

Hola Jennifer

Since the two piece drive-shaft was used in several years I will address this 
to all.

Before you remove the unit from the car place a long section of tape on the 
front and rear sections of the center.  What you are doing is making it easy to 
align the splines when you put it back together and want to keep the balance 
the same.

The center rubber section I got from our famed supplier just So. of the bay 
area.  His name is:  Lowell G. Howe @ 1-209-892-3464 .  He will require your 
old piece so be nice to it.  The Univ Joints are from the NAPA down the street.

                                       Rodger & Gabby
                                       Colo Spgs

'47 De Soto Custom w/Fluid Drive & passenger door mounted swamp cooler
'62 Crown Coupe w/std A/C & Auto-Pilot
'66 Le Baron w/dual A/C & reverbed AM/FM
'70 Overlander - InterNational Dbl
'70 W100 w/318, NP 4 Spd, 3:55 & Short Box
'77 D150 w/360, NP 4 Spd, 12 Bolt Axle, OEM Buckets & etc


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm