Re: IML: 81 Turn Signal lever part
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: 81 Turn Signal lever part



What color do you need? The replacements from Chrysler are usually black. All higher end Chrysler products of the 80's used the same turn signal stock. Should be held on by two small phillips screws, the wiring is a little tricky to feed back through, but the shop manual gives instructions on doing it. Bob
----- Original Message -----
Sent: Tuesday, May 30, 2006 12:21 PM
Subject: IML: 81 Turn Signal lever part

There is a die cast pivot lever inside the steering wheel cluster that the turn signal lever attaches to.  Mine broke.  I need the pivot lever or the steering column or whatever you may have.  I don't know about interchangability with other cars.  The 81 lever operates the dimmer switch, the windshield washer and wiper and the cruise control. 
 
Let me know what you have.  It you think you may have the part contact me and we can talk about it.
 
                                                                        Rolland Westra
                                                                        Rockford IL
                                                                        815 226 8046
                                                                        815 226 0576


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.