Re: IML: brake and axel question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: brake and axel question



earnpop@xxxxxxx wrote:
can i go to a napa store for the brake parts or must i now start a long search? and (2) what am i up against when it comes to changing out the wheel bearings? is it somethng i should tackle or should a shop do this?
If you need to replace the brake shoes, that shouldn't be a problem from NAPA or any other major supplier.  I expect the cable and hardware are parts that you may need to buy used from some of the salvage yards listed under "Parts" on the club's website.

For the axle bearings, you shouldn't have any problem finding new bearings and seals.  Removing the axles is no big deal (relatively speaking).  I always take axles to a local machine shop that will press off the old bearings and seals and press on the new ones for $25 per axle.  Having them do it is about a million dollars worth easier than doing it yourself.  Reinstalling the axles is a snap--just be sure to follow the directions in the shop manual to set the correct shaft end play adjustment.

Roll on!

Elijah


Imperial Power Window Switch Repair
 
Find Repair & Shop Manuals, Parts Books, History & More at The Imperial Bookshelf!
 

  My Collection of Imperials
 
1965 Imperial LeBaron 
  1967 Chrysler Newport Custom Sedan 
  1970 Imperial LeBaron 
  1971 Imperial LeBaron
 
 


Talk is cheap. Use Yahoo! Messenger to make PC-to-Phone calls. Great rates starting at 1¢/min.

Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.