Re: IML: Oil Breather Caps, and for my '56 in particular
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: Oil Breather Caps, and for my '56 in particular



Sounds like you have, excessive crankcase pressure. Check your crankcase road tube vent, or pcv. After dissasembly of many old engines, I've found stuck rings, which cause this problem, eventhough the engine seems to run ok. A cylinder leak-down test should confirm this. Ya'll have a nice day. Dave.
81 IMP. and MANY DODGES.
-------------- Original message --------------
From: YBSHORE@xxxxxxx
Imperialists,
 
    Has there ever been a device made whereby the oil breather cap filter which sits on top of the oil filler tube, which inevitably drips said viscousness, which is then sometimes sprayed through the entire engine compartment depending weather/driving conditions, or dripping onto the hot block and making for not-so-delightful aromas for the non fossil fuel people, etc., can a device be had that can "recycle" this dripping oil back into the crankcase via some hose overfill return or the like, or run it straight to the ground with a different style cap?  This problem occurs for me after extended "full operating temperature" excursions, which is my preferred driving getaways.
 
    How do other Imperialists deal with this apparently designed to drip cap?
 
Respectfully,
 
ybshore
 
'55 NY'er Deluxe Sedan
'56 Imperial Sedan


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.