|
Alan., I probably have the book for 93. What do you need or Jeff need to
know -Anthony
----- Original Message -----
Sent: Saturday, September 30, 2006 12:29
PM
Subject: Re: IML: ambient air temp.
sensor
Hi Jeff
From the FSM said the Temp is supplied to the EVIC (overhead
display) by the Engine Compartment NODE. This NODE thing-E is up front and
behind the grill. It look like any other black box module. The FSM said to
look at a 4th FSM I don't have called the 1990 AC, AY Body
Diagnostic Test Procedure Manual.
Has any one out there seen or have a copy of this book?
--
Alan Jordan
90 IMP
75
LeBaron
75 LeBaron Crown Coupe
--------------
Original message from "J & C" <jchudd@xxxxxxxxxxx>: --------------
Ken,
I'll check it out. I have found what looked
like sensor in front of the radiator towards the driverside. I changed it
with another sensor from a boneyard donor car and it still reads way
high...Thanks for the info... Jeff
----- Original Message -----
Sent: Friday, September 29, 2006 1:47
PM
Subject: RE: IML: ambient air temp.
sensor
Jeff,
Not sure about
the 90 Imperial, but the other Mopar cars I own have the sensor in front
of the radiator and off to one side out of direct
wind.
Ken
67 Crown 4 Dt
Ht
Hi all,
I have a question regarding the
location of the ambient
temperature
sensor that my
1990 Imperial uses for the overhead display console.
Right now it
always reads around 130 which I think is a default
number for a
bad sensor. I do not know the location of this sensor so
that I
can change it and get an accurate outside temp. Thanks...Jeff
1990
Imp.
1991 Imp.
|
