Re: IML: Starting after a long rest period
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: IML: Starting after a long rest period
- From: "Dan" <sunup@xxxxxxxxxxxxx>
- Date: Tue, 24 Oct 2006 19:56:28 -0800
Thanks Kenyon
Dan
----- Original Message -----
From: "Kenyon Wills" <imperialist1960@xxxxxxxxx>
To: <mailing-list@xxxxxxxxxxxxxxxx>
Sent: Tuesday, October 24, 2006 7:43 PM
Subject: Re: IML: Starting after a long rest period
In
preparation it would be helpful
to have information regarding starting an engine
that hasn't run for 13
years.
Also, is there a way to "winterize" an
engine?
There is an entire, well written section on that
located here:
http://www.imperialclub.com/Repair/Engine/renewal.htm
http://imperialclub.com/Repair/General/storage.htm
http://imperialclub.com/Repair/Engine/checklist.htm
http://imperialclub.com/Repair/Lit/Master/307/index.htm
You can check out ARCHIVE SEARCH or REPAIR (Engine) on
the club website to perform the searches that yeilded
these results.
Kenyon Wills
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial Mailing List. Please
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
Back to the Home of the Forward Look Network