Re: IML: am at my wits end

["Dick Faulds" <dfaulds@xxxxxxxxxxxxxxx>]

use a large hammer to hit the end shaft of the puller hit it hard then try the breaker bar then hit it again use some wd-40 wear glasses and keep theyour pets clear of the mayhem!

----- Original Message -----

From: Frederick Joslin

To: mailing-list@xxxxxxxxxxxxxxxx

Sent: Thursday, December 07, 2006 10:13 PM

Subject: Re: IML: am at my wits end

Have you tried a hammer?

It is amazing what you can do with a 2-3 lb sledge hammer in the right place.

----- Original Message -----
From: "Mark Battesby"
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: IML: am at my wits end
Date: Thu, 7 Dec 2006 15:24:21 -0800 (PST)

Hey guys I own a 1961 imperial .I also own a 47 desotto. I have been trying to get the rear hub off the driver side wheel . I bought a heavy duty puller and it wont budge . I have never seen anything like this happen before I even used a 5 foot breaker bar and all I can get is the whole wheel spins slightly . I feel like I am breaking something what should I do

Fred Joslin