IML: Headers for Imperials
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

IML: Headers for Imperials



Premade headers specified for any application besides
Imperial will likely not work.  The steering box is in
a completely different place than it is on other Mopar
cars due to the longer nose, and this leads to
"complications".  

Not to say that Schumacher hasn't solved the problem
(you'd have to ask them), but it's not likely based on
the time I spent researching options, since there are
not enough people putting headers on our cars to
justify an investment by a vendor.  - meaning that
custom would be your path if you're going to go that
way.


While not as cool looking as headers, the HP C-body
exhaust manifolds were the only option that I was able
to find, and I'm very happy with them - they are a
bolt-in solution without the exposure to cracking and
engine compartment heat that you get from headers,
custom made or otherwise.

item 320091994029 on ebay is an example.  

-K


--- "Henry Blair Jr." <henryblairjr@xxxxxxxxx> wrote:

> You may want to look at Schumacher Creative Services
> headers before
> you have them custom made.  These headers are both
> efficient and
> compact.
> 
> Henry
> 
> On 3/18/07, James    L BURTON <brnxbmbr@xxxxxxx>
> wrote:
> >
> > Well, I had the original engine rebuilt, I thought
> that it was also a 413
> > but  looking closer I was convinced that it is
> 383.  The original starter
> > takes up so much space  . And it makes this engine
> deprived of the
> > horsepower it should easily obtain, for the custom
> headers I'm going to have
> > made for it. The has an extreme make over and it
> needs the Hi output smaller
> > starter.
> > ----- Original Message -----
> > From: Bill Watson
> > To: mailing-list@xxxxxxxxxxxxxxxx
> > Sent: Sunday, March 18, 2007 4:12 AM
> > Subject: Re: IML: High output Starter For 60imp
> 383
> >
> >
> > Also, starters for 1962 and up V8 engines will not
> fit pre-1962 engines.
> > Before 1962 Chrysler used Autolite direct-drive
> starters.  Starting in 1962,
> > Chrysler-built reduction gear starters were used. 
>  The problem lies in the
> > ring gear - the number of teeth on the gear was
> changed along with the
> > starter.
> >
> > 1962-64 Dodge 880 and Chryslers with manual
> transmissions continued to use
> > direct-drive stafters as did Canadian-built
> 1962-66 slant six models
> > (Prestolite starter).
> >
> >
> > Bill
> > Vancouver, BC
> >
> >
> > ----- Original Message -----
> > From: JIM LORENZEN
> > To: mailing-list@xxxxxxxxxxxxxxxx
> > Sent: Sunday, March 18, 2007 12:07 AM
> > Subject: Re: IML: High output Starter For 60imp
> 383
> >
> >
> > Hi Jim -
> > Are you sure about the 383?  As far as I know,
> unless your Imperial has had
> > a heart transplant, it should have a 413.
> > Just curious -
> > Jim L. in OR
> > ----- Original Message -----
> > From: James L BURTON
> > To: mailing-list@xxxxxxxxxxxxxxxx
> > Sent: Sunday, March 18, 2007 12:43 AM
> > Subject: IML: High output Starter For 60imp 383
> >
> >
> > Hi,everybody, Im trying to locate a high output
> starter for a strong 383
> > .Sure could use some help. A model number would be
> nice also. Its for a 60
> > imperial.  Thank you Jim
> >
> >
> >
> > -----------------  http://www.imperialclub.com 
> -----------------
> > This message was sent to you by the Imperial
> Mailing List. Please
> > reply to mailing-list@xxxxxxxxxxxxxxxx and your
> response will be
> > shared with everyone. Private messages (and
> attachments) for the
> > Administrators should be sent to
> webmaster@xxxxxxxxxxxxxxxx
> > To UN-SUBSCRIBE, go to
> > http://imperialclub.com/unsubscribe.htm
> >
> >
> 
> 
> -- 
> Henry K. Blair, Jr.
> 4365 Butternut Way
> Roswell, GA   30075-5225
> (678) 248-4903, (770) 998-4897, Cell (770) 827-7392
> henryblairjr@xxxxxxxxxxxxx
> henryblairjr@xxxxxxxxx
> 
> 
> -----------------  http://www.imperialclub.com 
> -----------------
> This message was sent to you by the Imperial Mailing
> List. Please 
> reply to mailing-list@xxxxxxxxxxxxxxxx and your
> response will be 
> shared with everyone. Private messages (and
> attachments) for the
> Administrators should be sent to
> webmaster@xxxxxxxxxxxxxxxx
> To UN-SUBSCRIBE, go to
> http://imperialclub.com/unsubscribe.htm
> 
> 



 
____________________________________________________________________________________
Never miss an email again!
Yahoo! Toolbar alerts you the instant new Mail arrives.
http://tools.search.yahoo.com/toolbar/features/mail/


-----------------  http://www.imperialclub.com  -----------------
This message was sent to you by the Imperial Mailing List. Please 
reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be 
shared with everyone. Private messages (and attachments) for the
Administrators should be sent to webmaster@xxxxxxxxxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.