Re: IML: exhaust manifold for 60 imp "383" ???
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: exhaust manifold for 60 imp "383" ???



Not to worry, the only engines that used the odd ball manifolds, were 361-413 marine, industrial, heavy duty truck,  and some motor home engines.The manifolds shown, are standard mid 70's truck (pick-up)type. I've had many, and they are based on log style low performance types.An interesting manifold, are the ones on my 77 Dodge van 440, the log is below the spark-plugs, like the small block motors.Ya'll have a nice day, Dave.
 
-------------- Original message --------------
From: "Henry Blair Jr." <henryblairjr@xxxxxxxxx>
Before you buy this manifold, check out the bolt pattern on the manifold and the one on your head.  I think this is a truck motor manifold that has 7 bolts while the heads on passenger cars have only 6 bolts or studs.  The tip off to me is the two bolt holes on each end of the manifold.  On the truck manifold, the two end ports have 2 bolt holes and the center ports have three, two low and one high.

Henry

On 4/18/07, RODGER D. REDDISH <FltSgt@xxxxxxx> wrote:
Hola Jim
 
Every Imperial made starting with the 1959 production year until the last one went out the door in 1966 ( I mean 1978 ) had the 413 and then a 440.  If you truly have an 383 cubed engine, it is cause the original one went bye-bye.
 
I understand that things do happen in time.  Sooo, the answer to your question is:  any exhaust manifold from  the left hand ( aka drivers side ) from 1959 to 1966 will fit if it is from an Imperial ( 413 or 440 ).  If it is an 361, 383,413, 426 wedge or 440 from an lower division of MoPar and has the center dump exhaust manifold,  it to will work.
 
If you are think this may be a good time to do an "retro-fit" and gain some quick power by using one of the HP exhaust manifolds made from 1968 to 1978 that was on GTX's, RoadRunner's, Crashielr 300's and some more, do not waste your cash on any manifold from any spec'd whatever of these car's cause they will not fit/clear your ( or any 1959-1966 ) Imperial on the left side.
 
From the 1972 to 1978 Dodge Truck Division there is an HP center dump Exhaust Manifold.  It will add more power and appear as if it was placed there by an Imperial worker in 1960.  Both sides dump in the center and it will fit with out taking classes to learn how to get it to fit. 
 
 
Rodger & Gabby
COS
----- Original Message -----
Sent: Wednesday, April 18, 2007 4:56 PM
Subject: IML: exhaust manifold for 60 imp 383

Hi everybody,  Jim Burton here, looking for a exhaust manifold for 60 imp 383, the side without the heat riser gismo. Im not sure if a 413 will fit.   thank you



--
Henry K. Blair, Jr.
4365 Butternut Way
Roswell, GA   30075-5225
(678) 248-4903, (770) 998-4897, Cell (770) 827-7392
henryblairjr@xxxxxxxxxxxxx
henryblairjr@xxxxxxxxx


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.