Re: IML: 1955 Imperial
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: 1955 Imperial



All you need is a preformed hose. Take old hose to good parts store and they will find you a hose that you can trim to fit.  Been there, done that. I got the t-shirt.


-----Original Message-----
From: WBinegar@xxxxxxx
To: mailing-list@xxxxxxxxxxxxxxxx
Sent: Thu, 7 Jun 2007 3:37 pm
Subject: Re: IML: 1955 Imperial

This not a radiator hose. This is on the heater where the hose attaches on the firewall on the right hand side. You have the three hoses that are attached to the heater two go to the engine and one is a U that goes back into the heater. Do they make 5/8 ID heater hose that has wire inside?  




See what's free at AOL.com.

AOL now offers free email to everyone. Find out more about what's free from AOL at AOL.com.


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.