IML: Attachment hardware to wheel cover medallion - 64 Imp conv
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

IML: Attachment hardware to wheel cover medallion - 64 Imp conv



Hi to all - I ordered the medallion to replace one missing, but it came with 
no spring or clip or other mounting hardware. The other three wheel cover 
medallions (black/gold) all turn in place and I assume they're pressure mounted, 
but don't want to pry them off....

These are unique to the 64 Imp conv. as you know. Thanks for any advice re: 
what to get  re: mounting hardware.

Rex


**************************************
See what's free at http://www.aol.com.
----------------- http://www.imperialclub.com ----------------- This message was sent to you by the Imperial Mailing List. Please reply to mailing-list@xxxxxxxxxxxxxxxx and your response will be shared with everyone. Private messages (and attachments) for the Administrators should be sent to iml.webmonster@xxxxxxxxx To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm

Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.