IML: Sway bar on 58

From: <wardle65@xxxxxxxxxxxxxx>
Date: Sun, 9 Sep 2007 05:08:53 +1000

I am currently working on replacing my sway bar rubber bushings on my 58. I ahve all the rubbers however the FSM says "the sway bar cushions are not serviced separately. If replacement is necessary, install new sway bar assembly". On removal of this I have found that there is a welded peice between the rubber bushing and were it clamps down the strut bar. Has anyone replaced these on a 58 or have you replaced the whole assembly as stated by the FSM.

Regards

Chris Wardle

58 Imp Crown Coupe

Follow-Ups:
- Re: IML: Sway bar on 58
  - From: peter baikie
- Re: IML: Sway bar on 58
  - From: Graham Rollo

References:
- IML: Sway Bar Kit on ebay
  - From: Harvey Wells
- Re: IML: Sway Bar Kit on ebay
  - From: john sadowski

Prev by Date: IML: A friend needs a left fender skirt (75 Imperial)
Next by Date: Re: IML: A friend needs a left fender skirt (75 Imperial)
Previous by thread: RE: IML: Sway Bar Kit on ebay
Next by thread: Re: IML: Sway bar on 58
Index(es):
- Date
- Thread

Back to the Home of the Forward Look Network

Copyright © The Forward Look Network. All rights reserved.
Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.