RE: IML: carb gasket sealant....... yes or no ??
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: IML: carb gasket sealant....... yes or no ??



Mike,
 
I always install that gasket dry. Most sealants will not stand up to the new gasoline anyway and I have never head a problem installing dry.
 
Tom
 
-----Original Message-----
From: mailing-list-owner@xxxxxxxxxxxxxxxx [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx]On Behalf Of Michael Howlett
Sent: Friday, November 02, 2007 10:47 AM
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: IML: carb gasket sealant....... yes or no ??

Hello everyone,
I am in the process of finishing the engine on one of my project cars.
I am ready to mount the carb, but it's been about 30 years since my last engine rebuild.
Should I be using a gasket sealer compound on the gasket between the intake manifold and the carb. ??
This is on an older engine (pre - 80's)......
THANKS for all of your helpful advice,
-Mike in Oregon


 
On 11/1/07, therichardsonfamily@xxxxxxxxxxx <therichardsonfamily@xxxxxxxxxxx > wrote:
Thanks for the advice, Frederick.  I'll probably go the alarm route, just for the added protection.  I agree that they're relatively inexpensive, and I'm sure I can install it myself.  Just a few other items to take care of beforehand.
 

Dan Richardson
300L Family Heirloom


 -------------- Original message ----------------------
From: "Frederick Joslin" < fljoslin@xxxxxxxx>
> Dan:I would check out some of the local car stereo install shops to see
> what features are available on car alarms. If you go the alarm route you
> should probably install it your self and can probably purchase a good
> unit via the internet. If you install it yourself, not only will you
> protect the integrity of your car better, but you will also know how it
> was installed if any problems arise down the road (so to speak). I had an
> alarm in an Isuzu PU that I installed which worked flawlessly for 15
> years. I had another alarm in a Grand Caravan which was not installed by
> me which had problems that I could not figure out and I did not want to
> pay anyone else to figure out so I just stopped using it. A big P in the
> A.As to the remote "kill" feature, once in the Isuzu I was driving on the
> Interstate with the remote in my pocket. The panic feature got activated
> and the horn started honking and lights started flashing. I had no idea
> what was going on and this totally freaked me out, but if the engine had
> been killed on I-55 in St. Louis rush hour traffic at 80 mph it could
> have been much more serious.
>
>   ----- Original Message -----
>   From: "Daniel Richardson"
>   To: mailing-list@xxxxxxxxxxxxxxxx
>   Subject: Re: IML: remote ignition cut off switch
>   Date: Wed, 31 Oct 2007 20:15:34 -0500
>
>
>   I'm not really worried about the carjackers
>   but, a way to immobilize the car from 300 feet
>   could serve a few purposes. I guess I didn't
>   think of the possible accidental shut-off of an
>   electrical kill switch, though. Perhaps the
>   whole burglar alarm idea is the best way to go.
>   Thanks for the thoughts everyone.
>
>   Dan Richardson
>   300L Family Heirloom



---------- Forwarded message ----------
From: "Frederick Joslin" < fljoslin@xxxxxxxx>
To: mailing-list@xxxxxxxxxxxxxxxx
Date: Thu, 1 Nov 2007 15:02:24 +0000
Subject: Re: IML: remote ignition cut off switch
Dan:
I would check out some of the local car stereo install shops to see what features are available on car alarms. If you go the alarm route you should probably install it your self and can probably purchase a good unit via the internet. If you install it yourself, not only will you protect the integrity of your car better, but you will also know how it was installed if any problems arise down the road (so to speak). I had an alarm in an Isuzu PU that I installed which worked flawlessly for 15 years. I had another alarm in a Grand Caravan which was not installed by me which had problems that I could not figure out and I did not want to pay anyone else to figure out so I just stopped using it. A big P in the A.
As to the remote "kill" feature, once in the Isuzu I was driving on the Interstate with the remote in my pocket. The panic feature got activated and the horn started honking and lights started flashing. I had no idea what was going on and this totally freaked me out, but if the engine had been killed on I-55 in St. Louis rush hour traffic at 80 mph it could have been much more serious.

 
----- Original Message -----
From: "Daniel Richardson"
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: Re: IML: remote ignition cut off switch
Date: Wed, 31 Oct 2007 20:15:34 -0500


I'm not really worried about the carjackers
but, a way to immobilize the car from 300 feet
could serve a few purposes. I guess I didn't
think of the possible accidental shut-off of an
electrical kill switch, though. Perhaps the
whole burglar alarm idea is the best way to go.
Thanks for the thoughts everyone.

Dan Richardson
300L Family Heirloom


----- Original Message ----- From: "Ken Lang"
To:
Sent: Wednesday, October 31, 2007 7:00 PM
Subject: RE: IML: remote ignition cut off switch


> If it's carjackers you're worried about the best solution is a large gun.
> The next solution would be an electric fuel pump with a cut off switch
> that's easy to hit as you exit the vehicle. The theory being to let the
> carjacker take the car but hit the switch as you exit. The thief will only
> get a block or two with the fuel in the carburetor bowl. He will abandon
> the car where it dies after a couple of unsuccessful attempts to restart it.
> Meanwhile, you've had time to run for cover and put distance between him and
> you. If you have fuel injection this solution won't work for you and you
> may want to revert back to the first suggested solution.
>
> Ken
> 67 Crown 4 Dr Ht
> 68 LeBaron 4 Dr Ht
>
>
>
> -----Original Message-----
> From: mailing-list-owner@xxxxxxxxxxxxxxxx
> [mailto:mailing-list-owner@xxxxxxxxxxxxxxxx] On Behalf Of
> therichardsonfamily@xxxxxxxxxxx
> Sent: Wednesday, October 31, 2007 12:14 PM
> To: IML
> Subject: IML: remote ignition cut off switch
>
> Hello all:
>
> I looked on the IML site, Radio Shack, and other auto parts sites, and
> didn't find what I was looking for.
>
> I would like a remote operated "ignition kill switch / relay" for my car
> with a '67 Imperial engine (required content). I would think a very simple
> relay that cuts out the power to the ballast resistor? Something that
> operates from 300+ feet? You know, to thwart all the car-jackers here in
> the cornfields of Illinois.
>
> Anyone have advice on this subject? Otherwise, I'll have to get my
> engineering freshman Son to design one for me (might as well get something
> out of the 25K/year).
>
> Thanks in advance for any tips,
>
> Dan Richardson
> Family Heirloom


----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial
Mailing List. Please reply to
mailing-list@xxxxxxxxxxxxxxxx and your response
will be shared with everyone. Private messages
(and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm



Fred Joslin





Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.