Re: IML: Fw: voltage regulator contacts burning
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: Fw: voltage regulator contacts burning



It may be possible the replacement regulators are set up to control the voltage at too close a voltage drop. If all connections are good, and clean and the battery is not "punky", you may have to remove the regulator cover, and do a minor bending and tweaking (FSM) explains it. If all else fails, a solid state type may be the next coarse of action. Dave.
 
-------------- Original message --------------
From: "Chris Strohmeyer" <chrisstroh@xxxxxxxxxxx>

>
> ----- Original Message -----
> From: "Chris Strohmeyer"
> To:
> Sent: Sunday, November 11, 2007 11:10 AM
> Subject: voltage regulator contacts burning
>
>
> > What would cause this? They burn a little pointed shard across them and
> > they start sticking. I've tried a new regulator and the same thing. The
> > alternator was changed recently too.
> >
> > Thx,
> > Chris Strohmeyer
> > 67 Imperial Convertible
> >
>
> ----------------- http://www.imperialclub.com -----------------
> This message was sent to you by the Imperial Mailing List. Please
> reply to mailing-list@ imperialclub.com and your response will be
> shared with everyone. Private messages (and attachments) for the
> Administrators should be sent to iml.webmonster@xxxxxxxxx
> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
>


Home Back to the Home of the Forward Look Network


Copyright 2018 The Forward Look Network.  All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.