Re: IML: Details of '55 exterior trim pieces
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: IML: Details of '55 exterior trim pieces



Hi
 
All of my trim is original and looks like you describe, the texture is by design. I have thought of painting the textured part maybe red. Where is the plating shop located ?
 
Jan in Ojai, CA
1955 Sedan
----- Original Message -----
Sent: Friday, December 07, 2007 10:29 AM
Subject: IML: Details of '55 exterior trim pieces

Here's hoping that some of the '55 experts can comment on the details in the external side spears trim texture. I just had my external pot metal trim repaired and replated. The car was a driver's car with pits in all of the pot metal pieces. I am concerned that the job was not completed properly, but I have no reference. The inner recesses of the side pieces look like there are gazillion little pits while the border surfaces are nice and smooth. The border surfaces had significant numbers of larger pits, and those were corrected. Are the recesses on the side trim supposed to have texture or are they supposed to be smooth? The condition also exists on the inner surfaces of the grill pieces as well as the lower trim at the rear bottom of the quarter panels.
 
I could sure use some reference to either tell Frankford Plating Inc. that they did a great job, or that they left a lot of work undone.
 
Thanks in advance for any responses.
 
Roger
'55 Newport, Canyon Tan and Desert Sand


No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.503 / Virus Database: 269.16.17/1177 - Release Date: 12/7/2007 1:11 PM


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.