IML: 413 engine rebuild 59 Imperial crown
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

IML: 413 engine rebuild 59 Imperial crown



I purchased a 59 Imperial Crown recently that was in great shape except for the fact that the engine had water in the oil. We have taken the engine apart and the block and heads are at the machine shop being cleaned and magna fluxed. So far the gaskets were in good shape and there are no apparent cracks. Any ideas on where the water came from? Some have said that water could have condensed in the engine. The car sat for 8 years without being used in Florida. The engine turned well, but the oil was a light grey brown color. There was very little rust inside the engine. Did the 413 engine block have any weak spots. I know this was the first year for this engine and they were going for a light weight large block engine. Are there any design flaws with this engine? Thanks, David Carpenter


Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.