Re: IML: Fw: ring and pinion identification part #? 67 Imperial

["Frederick Joslin" <fljoslin@xxxxxxxx>]

Randysringandpinion claim to have the factory part for your Imperial in the 2.94:1 ratio for $376.

 

http://www.ringpinion.com/ProductDetails.aspx?ProdID=1786 

----- Original Message -----
From: "Chris Strohmeyer"
To: mailing-list@xxxxxxxxxxxxxxxx
Subject: IML: Fw: ring and pinion identification part #? 67 Imperial
Date: Sun, 2 Mar 2008 09:28:32 -0800



----- Original Message ----- From: "Chris Strohmeyer"
To:
Sent: Friday, February 29, 2008 4:59 PM
Subject: IML: ring and pinion identification part #? 67 Imperial


> Hi all!
>
> Can some one give me a part # or #'s for my
> stock ring and pinion on my 67 Imperial so I
> know what to search for? I have a 8-3/4"
> differential with a 2.94 ratio in a #742
> case. It happens to be a Sure Grip but I
> think the ring and pinion gears are the same.
> I'd prefer to buy NOS but that might not be
> realistic.
>
> The Mopar dealer's book only went back to 1970 and here's the #'s he gave me.
> Pinion#2643119 1/3/4" stem
> Ring#264118
> 2.94 ratio
>
> Thanks!
> Chris Strohmeyer
> 67 Imperial Convertible
>
> ----------------- http://www.imperialclub.com -----------------
> This message was sent to you by the Imperial
> Mailing List. Please reply to
> mailing-list@xxxxxxxxxxxxxxxx and your
> response will be shared with everyone.
> Private messages (and attachments) for the
> Administrators should be sent to iml.webmonster@xxxxxxxxx
> To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm
>


----------------- http://www.imperialclub.com -----------------
This message was sent to you by the Imperial
Mailing List. Please reply to
mailing-list@xxxxxxxxxxxxxxxx and your response
will be shared with everyone. Private messages
(and attachments) for the
Administrators should be sent to iml.webmonster@xxxxxxxxx
To UN-SUBSCRIBE, go to http://imperialclub.com/unsubscribe.htm

Fred Joslin