Re: [FWDLK] What is this ?

[John McCann <jmccann@xxxxxxxxxxxxxx>]

check here
http://www.engineersedge.com/drill_sizes.htm
John

----- Original Message ----- 
From: "David Homstad" <dhomstad@xxxxxxxxxxx>
To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
Sent: Monday, June 30, 2008 5:09 PM
Subject: Re: [FWDLK] What is this ?


> Ron,
>
> Any Machinist's Handbook could tell you what size a # 19 drill is, but I
> don't have one.
>
> Dave Homstad
> 56 Dodge D500
>
> -----Original Message-----
> From: Forward Look Mopar Discussion List
> [mailto:L-FORWARDLOOK@xxxxxxxxxxxxx]On Behalf Of Ron Waters
> Sent: Monday, June 30, 2008 6:22 PM
> To: L-FORWARDLOOK@xxxxxxxxxxxxx
> Subject: [FWDLK] What is this ?
>
> My 58 Plymouth shop manual refers to a #19 drill when discussing the
> distance the carb choke should 'pull off' when the car is started. What is 
> a
> #19 drill, or can anyone share what the thickness of this guy is so I can
> find a device to simulate the thickness ?
>
> Thanks,
>
> Ron
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1