Re: [FWDLK] Removing Front Crank Shaft Seal

[Ron Waters <ronbo97@xxxxxxxxxxx>]

Thanks, Ed.

I used a body spoon and lifted it out. Good to go !

Ron


----- Original Message ----- 
From: "DOLORES ECKERSON" <eddee@xxxxxxxxxxxxx>
To: "RON WATERS" <ronbo97@xxxxxxxxxxx>
Sent: Friday, June 18, 2010 3:59 PM
Subject: RE: [FWDLK] Removing Front Crank Shaft Seal


> RON
> I just use a screwdriver and hammer to bend in the side of the seal then 
> jimmy it out
> ED
>
>
> On Fri, Jun 18, 2010 at 1:47 PM, Ron Waters wrote:
>
> > Hi Gang -
> >
> > I need to remove the front crank shaft seal (near the water pump). 
> > What tool do I need to remove this ? The engine is a 326 (just like a 
> > 318) from a 59 Dodge. The engine is disassembled.
> >
> > Thanks,
> >
> > Ron *************************************************************
> >
> > To unsubscribe or set your subscription options, please go to
> > http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1