Hi Ron, I agree with Mike that one of the basic meters will probably work
fine.
However I use a mini Triplett analog meter for most of my auto work an
Amprobe brand and a Fluke occasionally (digitals). Just depends on the
situation. Not sure about what Radio Shack sells these days but don't spend
a lot on made in China when Harbor Freight sells them for $2.99
--------------------------------------------------
From: "Mike Singer / Emporium Secondaries, Inc." <desoto@xxxxxxxxxxxxxx>
Sent: Saturday, January 14, 2012 1:56 PM
To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
Subject: Re: [FWDLK] Multi-meter Purchase
Hi Ron,
I prefer the analog over digital. When you are looking at little blips
such as momentary contact switch or points opening and closing the digital
does not act fast enough to see. The analog meters are getting hard to
find. If you want to measure the difference between 12.5 volts & 12.6
volts the go digital. For most automotive work a $ 10.00 to $ 20.00 unit
will work great.
Just my 2 cents worth,
Mike
At 01:12 PM 1/14/2012, you wrote:
Hi Gang -
I have a gift card from Radio Shack that I want to use to purchase a
Multi-meter. I'm looking for a nice basic one that I can use for my
vintage car projects. Can anyone recommend one ? I'd prefer digital over
analog. Also, are the Radio Shack ones any good, or should I look
elsewhere, like Sears/Craftsman ?
Ron
*************************************************************
To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
Mike Singer
Phone: 814-486-1881 Work
814-486-1010 Home
Fax: 814-486-2080
e-mail: desoto@xxxxxxxxxxxxxx
11769 Route 120
Emporium, PA
*************************************************************
To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2012.0.1901 / Virus Database: 2109/4742 - Release Date: 01/14/12
*************************************************************
To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
|
|