Re: [FWDLK] Fuel gauges

["Brendan Sheehy" <desoto@xxxxxxx>]

The light will blink because that is how the panel voltage regulator works.
It turns 12 volts on and off to obtain an average of 5-6 volts.


david tsow wrote:

> The needle on the fuel gauge of my 61 Newport does not move. How do I tell
> if the problem is the sending unit or the gauge. I am getting voltage to
> the sending unit (the test light blinks rather than light continuously) ,
> and the grounding clip appears  to be OK. Any info is much appreciated.
>
> -David