Re: [FWDLK] Thermostats for later polys
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Thermostats for later polys



Paul... That's interesting.  The thermostat company wasn't on the ball, but
I always drill a 1/16th hole in the flange of any thermostat I install.
Otherwise the big Stant thermostat seems ideal for the poly engine.

At 01:50 PM 11/11/2002 -0500, paul holmgren wrote:
>
>From my understanding, the High performance thermostats wer more of this
>nature. Big hole for the main flow, and if the thermostat company was on
>the ball there should be a small hole in the unit for air bubbles to
>pass through.
>--
>Paul Holmgren
>Hoosier Corps #33, L-6
>2 57 300-C's in Indy
>
>

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Vote now for the 2003 Calendar vehicles!

http://www.forwardlook.net/calendar2003



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.