Re: [FWDLK] When things don't pan out
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] When things don't pan out



Dan,
Why don't you fix the pan you have?   Or, get it fixed, pronto ?
That's what I would do, without knowing all about it and why
it wouldn't be fine.
Tom                            57 Coronet in southern Ohio

Dan Morton wrote:

> This morning I wired one of my wife's deep baking pans under Faulkner, threw in two
> quarts and sped to my local mechanic before the oil ran out.  This is the guy who
> told me I needed a rear seal.  Turns out -- I don't!!  The oil pan had a small hole
> way up high, near the seal, that's been progressively opening.  So -- the good news
> is, no need to pull the trans, OR replace the rear main seal.  At least, not at this
> point.
>
> So I'm in the market for an oil pan, 318 A block.  Does anyone know where I can get a
> used, NOS or replacement in a hurry?  Also, any info about interchangability with
> other blocks would be helpful...

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
2003 Calendar voting results and ordering information is online!  Please visit:
http://www.forwardlook.net/calendar2003 for more information.



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.