Re: [FWDLK] MORE BUMPER JACKS

[Glenn Barratt <FURY@xxxxxxxxxx>]

Ron.
My jack base is exactly as you describe-square, with the same letters and wording, and with the
elongated 1 1/4 inch hole with no recess. Square post.
Glenn.
57 Fury.

Ron Waters wrote:

> Hi Ed -
>
> I checked the jacks. One has a tapered pole while the other is square.  The
> mechanism has a curved area where it meets the bumper.  The base is square
> as stated with the 3/8" letters AB - K located next to where the pole goes
> into the base.  Also has the words PATENT PENDING in 5/16" letters on
> another side.  I have two of these bases that are nearly identical, except
> one has a recess with a hole on one side.  The other has an elongated hole 1
> 1/4" long with no recess.
>
> Does anyone else have similar jack or base ?
>
> Thanks,
>
> Ron
>
> ----- Original Message -----
> From: "eddee" <eddee@xxxxxxxxxxxxx>
> To: <ronbo97@xxxxxxxxxxx>
> Sent: Friday, October 03, 2003 8:01 AM
> Subject: Re: [FWDLK] MORE BUMPER JACKS
>
> > Ron
> > I do not have a digi camera
> > wish I did,,,I usually borrow a neighbors,,she is not home.
> > You can see the other mail,,,they think its late 60s or early 70s
> >
> > The mechanism looks like our type of mechanism,,,but the 'connection' for
> > the bumper piece is not required!
> > It has that little tab which obviously fits into a bumper slot.
> >
> > You had mentioned that you were pretty confident that 'OUR' correct jack
> had
> > a square base,,,,,but could you advise the shape of the pole---or the
> shape
> > of the hole in the base to accept the pole.
> > Was it square or trapazoid??
> >
> > Thanks--I LOVE A MYSTERY
> > ED
>
> -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> Over 25,000 pages of archived Forward Look information can be easily searched at
> http://www.forwardlook.net/search.htm  Powered by Google!

-- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
Over 25,000 pages of archived Forward Look information can be easily searched at
http://www.forwardlook.net/search.htm  Powered by Google!