Re: [FWDLK] Brakes for 57 Dodge
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Brakes for 57 Dodge



It is my understanding that from speaking with Roger at AAJ that HE modifies that master cylinder and drills and taps it for the hydraulic switch, so if you get the master cylinder from him, it comes that way.  So, perhaps that's where Tim Satter got his.


Dave Stragand wrote:
Message
The '68 Roadrunner M/C fits very well.  It uses some funky fittings, but I got them off of "adapter lines" from Pep Boys and just flared them onto new lines.  I did have to turn down the last 1/2" of the original  adjustable power brake pushrod.  I turned it down on a grinder to better fit in the hole on the m/c pushrod rather than just cutting it shorter.  Oh, by the way, there are two versions of this.  A short one, with a bolt-on cap, and a tall one, with a bail wire cap.  You'll need the shorter one.  I bought a brand new Wagner one for about $50 with no core charge.
 
You have to rig up a manual power brake switch though, unless someone could ID this m/c -- it seems identical to the roadrunner m/c except for the brake light fitting.  http://www.forwardlook.net/events/Carlisle2004/im004710.jpg  Anbody know what one it is?  It's on Tim Satter's '57 DeSoto Firesweep...
 
-Dave
-----Original Message-----
From: Forward Look Mopar Discussion List [mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] On Behalf Of Larry Ashbaugh
Sent: Thursday, July 22, 2004 6:11 PM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: [FWDLK] Brakes for 57 Dodge

I need to replace or update the mastercylinder on my 57 Coronet, 325 manual brake car.  Discussions a while back focused on a newer, dual MC that was a direct replacement for our single MC.  I understand the safety factor, but how difficult is this conversion, and what besides the MC is required (Line splitter box, rerouting of brake lines, etc)? 

Also plan to replace the transmission emergency brake at the same time, since mine is saturated by fluids from many years of use and long periods of sitting.  Are these available from NAPA or other "quality" parts houses?

LARRY (Akron)



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.