Re: [FWDLK] any Torqueflite experts?
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] any Torqueflite experts?



If it has been sitting that long, and working when you parked it, you may
want to start with dropping the pan and changing the fluid and the filter.
When I had my 56 Plym it also sat for a number of years. Initially there was
no life in the trans at all.  I changed the fluid and filter and after the
car idled for a while pumping fluid through the torque converter it came
back to life.


Scott 1956 Dodge Custom Royal Lancer 2002 Dodge Ram Quad Cab





----Original Message Follows----
From: "Edward X. Petrus" <desoto@xxxxxxxxxxx>
Reply-To: "Edward X. Petrus" <desoto@xxxxxxxxxxx>
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: [FWDLK] any Torqueflite experts?
Date: Thu, 19 Aug 2004 05:42:25 -0400

Hi, gang.  Last evening I put my newly-sealed gas tank back into the 57
Adventurer project. I hooked everything back up, put 5 gallons of fresh gas
into her, and tightened the belts (it eliminated some squeal I had).

She fired right up, ran great, and smoothly edged into reverse when I
depressed the R button. This is the first time since 1972 the car has moved
under its own power! However, when I eased it into D, or 1 or 2 for that
matter, nothing happened. No clunk, no movement, no nothing. I pushed the
car back into its resting spot at the far end of my driveway. I'm thinking
(and hoping) it's just a linkage adjustment that's needed. However, the
service manual shows a multitude of possible problems when there's no
forward movement, including pressure checks, line lube, clutches, etc. but
there's no mention of the linkage situation.

When I rebuilt the engine, I put a new front tranny seal in, but did not do
anything else to the transmission. It has never been out of the car, so far
as I know.  Fluid on the dipstick looks great, but I have not had the pan
off.

Any suggestions on where to start (hopefully without pulling the unit out
of the car)? Transmissions are one of my weak points, so don't be afraid to
talk to me on a first-grade level.

As always, thanks for any advice offered.

Ed Petrus

a

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today - it's FREE!
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.