> I was down at Gary Goers just over a week ago to pick up some of
my
> stuff for my 62 300H convertible and I noted that Gary has a large
> quantity of the reproduction side medallions for the 1957 to 1962 300
> cars in stock. Now these are beautiful accurate duplicates of the
> originals made from a steel injection mould. The quality of these
> medallions is superb and will not be matched by other inexpensive
> methods. I know that Gary has invested a lot of money to get these
> moulds done and I think that we should support him with that rather
than
> running "off shore" with unknown reproductions.
> Due to all of the spam problems that Gary has been experiencing
and
> still is (believe me as I saw it), is to write to him and quote part
> #542 which are priced at $60 for this medallion. I would also suggest
> getting his latest catalog #9 which is normally priced at $4.00 so
that
> you can see the items that you need. For his mailing address, simply
> look at
> www.garygoers.com
> I did spend several hours at his shop and I must tell you that he
> puts in very long hours pretty well 7 days a week to get our stuff
done
> for our cars. In case you were not aware of this, Gary had been a
> batchelor for many years after a marriage break down many years ago
when
> he still lived in California (before move to Kalispell Montana) but
> things are looking better for him as he's had a lovely lady living
with
> him for the past couple years and so things are looking better and
more
> normal for him.
> I know that it has been very difficult in reaching him either via
> email (which has been hit and miss due to all the spam that he was/is
> getting) and impossible to reach him on the telephone as he simply
> doesn't have the man/woman power at this time to handle the phone. So
> again, the mail is still the best way to deal with orders, etc from
him
> as he does take the time to tackle those.
> Sorry for rambling on so long but I am grateful that we have Gary
> available to do our reproduction parts so please let's support him not
> only with the parts which are non available elsewhere but also the
seat
> interiors, etc that he does such an excellent job in making.
> Cheers from Fern in Cranbrook SE BC
>
*************************************************************
To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
|
|
Back to the Home of the Forward Look Network