Re: [FWDLK] door handle removal tool

[Tom Duross <6t4belvedere@xxxxxxxxxxx>]

Thanks Dave, I've been looking for a good one.  You recommend this?
Some have been so cheap and don't really fit tightly around the axle.
Can you put up an exterior trim removal tool?  I could really use a good
one.
The last one I had I coated the tines but now I can't find it anymore.

Tom Duross
Boston

----- Original Message -----
From: "Dave Stragand" <dave.stragand@xxxxxxxxxxxxxxx>
To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
Sent: Tuesday, January 11, 2005 10:34 AM
Subject: Re: [FWDLK] door handle removal tool


> For those of you who don't want to go the 'bent butterknife' approach, I
> have added a tool to the Site Store that should do the trick -- "Window
> Regulator and Door Handle Remover"
> http://www.forwardlook.net/sitestore/tools.htm  It's only $4.99.
>
> The smaller end has the tab needed to catch the little springy end of the
> retainer clip. It's all the way at the bottom of the page.
>
> -----Original Message-----
> From: Forward Look Mopar Discussion List
> [mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] On Behalf Of Bryan Scott
> Sent: Sunday, January 09, 2005 7:56 PM
> To: L-FORWARDLOOK@xxxxxxxxxxxxx
> Subject: [FWDLK] door handle removal tool
>
>
> Hi all!
>
> I'm wondering if anyone has a part number/manufacturer for a door handle
> removal tool that works on their 57 or 58 DeSoto?  I bought one that
> looked
> like it would do the trick, but noooooooooo!
>
> Thanks for your help!  Also, if you have any helpful tricks to do the job
> (that might not be obvious or common knowledge) please pass them on!
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1