Re: [FWDLK] BRAKE LIGHT SWITCH

[Nick Sperduto <drt-rdr@xxxxxxxxxxx>]

I did the same thing as reggie except I put the "T" in teh line that went to
the rear brakes.
Nick
Lebanon Township, NJ
----- Original Message -----
From: "Reggie Knowlton" <Reggie_Knowlton@xxxxxxx>
To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
Sent: Monday, July 25, 2005 10:38 AM
Subject: Re: [FWDLK] BRAKE LIGHT SWITCH


> I have an easier way.  Put a "T" connection just out of the master
cylinder
> and screw the switch to the "T" and the other outlet to the line going to
> the brakes.
>
>
> -----------------------------------------
> CONFIDENTIALITY NOTICE:  This electronic message contains information
> which may be legally confidential and/or privileged and does not in any
> case represent a firm ENERGY COMMODITY bid or offer relating thereto
> which binds the sender without an additional express written
> confirmation to that effect.  The information is intended solely for
> the individual or entity named above and access by anyone else is
> unauthorized.  If you are not the intended recipient, any disclosure,
> copying, distribution, or use of the contents of this information is
> prohibited and may be unlawful.  If you have received this electronic
> transmission in error, please reply immediately to the sender that you
> have received the message in error, and delete it.  Thank you.
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1