[FWDLK] FW: [FWDLK] How do you remove a door panel?

[Dave Stragand <dave.stragand@xxxxxxxxxxxxxxx>]

Title: Message

---

From: Dave Stragand [mailto:dave.stragand@xxxxxxxxxxxxxxx]
Sent: Saturday, February 05, 2005 2:50 PM
Subject: RE: [FWDLK] How do you remove a door panel?

 

Bend 1/4" of the tip of an old butterknife up at a 90 degree angle -- that's pretty much all you'll need.

The tab is like a square that fits in a groove on the shaft.  When you slide the tab in towards the shaft, it releases the other side of the tab from the groove in the shaft, and it will come off.  After you do the first one, the rest are easy.  You just have to understand how it works first.  Find the springy side of the tab, and push it towards the shaft.  The clip won't come off, but it will move about 1/4" in. towards the shaft.

The clip looks something like this picture (if it goes through the listserv)

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1