Re: [FWDLK] carbs on Ebay (57 Plymouth)

I did have a '57 Plymouth dual WCFB setup, and yes, it did have a heat tube that looped down into the -=INTAKE=- manifold and back out. I specifically remember it because I had to patch the little tube -- it had too sharp of bends to be able to recreate. It’s the “looped over” piece in this picture.

The 1958 Plymouth dual AFB setup (on a 350) is a different animal altogether. It uses a heat tube that goes through the passenger side EXHAUST manifold, like so:

-----Original Message-----
From: Forward Look Mopar Discussion List [mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] On Behalf Of Paul Holmgren
Sent: Friday, February 17, 2006 1:59 PM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: [FWDLK] carbs on Ebay

Hello all, does anyone have a 2 4 barrel 57 plymouth??

If so, did that application use a heat tube from the exhaust manifold

for the choke in 57??

Paul Holmgren

2 57 300-C's in Indy

Hoosier Corps L#6

*************************************************************

To unsubscribe or set your subscription options, please go to

http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1