Re: [FWDLK] Unsticking a stuck engine?

[Mike Apfelbeck <moparmike72@xxxxxxxxxxx>]

Spring for a set of head gaskets and pull the heads off. It's a whole lot
less time and effort to just take the heads off than it is to spend weeks
trying out everyone's home remedies.

Mike

At 07:52 AM 4/23/2006, David Gedraitis wrote:
> Hi list,
>
> So now that I've established that the engine I have is frozen into a
> rather nice anchor, I have a few questions. Please keep in mind the
> following: It is a non-matching #'s engine, and it'd be cheaper to buy a
> reman for this particular application than to have it rebuilt, so the
> motive behind unsticking it is to get it to turn, then get it to run,
> then use it, where it is, as is. Do I have any hope of it running
> properly? If so, what is the best way to get it unstuck? 
>
> Thanks all,
>
> Dave
>
>
>
> Yahoo! Messenger with Voice. PC-to-Phone calls for ridiculously low
> rates. 
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go
> to 
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1