Re: [FWDLK] Driving fan cage off of motor shaft
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Driving fan cage off of motor shaft



Tom:

 

Thanks for the warning & tips.

 

Excellent point that I have previously learned the hard way by mushrooming and bending a shaft.  I tapped this one lightly and will finish driving out with a ¼” cone tipped drift punch.  Been over 100 13 days straight and expect another two days of it before it breaks—so will let her soak a few more days before finishing.  I’ll try the prying first, but the squirrel cage is large diameter and kind of flimsy and the mounting plate is fiber, not steel.  Still 101 in the garage at 9:30 PM thanks to parked hot Jeep & Durango.

 

I have heard good things about PB Blaster, Deep Creep and Kroil.  All could do with more descriptive names—like Liquid Wrench??

 

Rich Barber

Brentwood, CA


From: Forward Look Mopar Discussion List [mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] On Behalf Of tom taylor
Sent: Tuesday, July 25, 2006 2:08 AM
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: [FWDLK] Driving fan cage off of motor shaft

 

Good post on Deep Creep as I normally use PB Blaster.

 

I read where you planned to drive out the blower from the motor shaft if it did not easily come off.  This is where I usually get into trouble in that the end of the shaft gets out of shape and in some cases exerts more pressure on the surrounds making it even more difficult to remove.  You might want to use a vice to stabilize the motor and try to pry off the fan cage first – a little at the time all around before getting out the punch.  A nick in the shaft center will help keep a good punch centered. 

 

Tom

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.