Re: [FWDLK] Pitted Pot-Metal
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Pitted Pot-Metal



There is a Basecoat/Clearcoat paint that is very close to chrome,cost around $90 a pint that you can use on pitted pieces.The part must be sand or bead blasted,filled with a polyester filler (body filler or 2 part spot putty),primed with a 2 part primer,wet sanded and sprayed like paint.I've seen the results at a booth at swap meet,not quit as nice as chrome but very close.I doubt I would do my exterior large trim,but for say vent window bases and all it is a very cheap alternative.Check with your local body shop supplier.
Adam Lindenbaum

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.