Re: [FWDLK] not mine BUT!
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] not mine BUT!



The intake will fit any 315/325 (and, maybe[?] the earlier Dodge V/8's;
the exhaust ports, on the heads were different, but the intake-ports
were the same.

Of course, the 325 engines had rectangular -pattern mounting studs/bolt
holes on the intakes, and on the carb bases..

The 315's had square-pattern studs, on the intakes, and square pattern
carb base-holes.

The square-pattern studs can be re-positioned
to a rectangular pattern, to accomodate the rectangular WCFB's (or
AFB's).

But, as the seller states, this racing intake (derived from the
Kiekaeffer design) does not have any heat cross-over passages in it, so
"cold-starting/operation" could be problematic.


Neil Vedder

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.