Re: [FWDLK] Build sheet /card locations
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Build sheet /card locations



MY black car which is the one still being done, had come celepane tape on the trunk floor, it passed underneeth something (seem to recall it passed under part of the saddle or loop for the spare tire holddown)  we didnt discover just what it was for.
Couldnt tell if it taped something there. This was discovered in 96 during the final teardown phase,

--
Paul Holmgren
2 57 300-C's in Indy
Hoosier Corps #L6


-------------- Original message ----------------------
From: Wayne Graefen <wgraefen@xxxxxxxxxxxxxx>

> I did an inspection on a '57 Chrysler 300C that was one of the factory stick 
> shift cars that had 23K miles at the time.  While on a creeper under the car I 
> found the IBM card from which the car was built well-taped to the crossmember 
> above the rear axle to which the upper mount of the rear shocks was attached.  
> The card was taped between the shock mounts with the tape wrapping the 
> crossmember so it had to be put there before the body was assembled to the 
> chassis.

> Wayne

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.