[FWDLK] Flat 6 carb spacer
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[FWDLK] Flat 6 carb spacer



Ok, this should be my last question for now. I'm having hard starting problems with my flat 6 in my 56 Plymouth when it's hot. I've been having them for years but never really bothered figuring it out. I was talking to Dave at C@C about it and he mentioned to me about a spacer between the carb and manifold. Helps to keep the gas from boiling out of the carb. I do have the spacer on my carb. Here is the question.

In the order going up, should it be

manifold - spacer - heat shield - carburetor

or

manifold - heat shield - spacer - carburetor

should the spacer be between the carb and heat sheild or between the heat shield and manifold.

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.