Re: [FWDLK] removing front sway bar

[eastern sierra Adj Services <esierraadj@xxxxxxxxx>]

Scott, if you are referring to  the bracket on the lower control arm,
you may have to use a small cutting disc, to create a separation of the
bottom corner of the bracket, in order to bend the bracket, to remove
the bushing from the bracket .

After inserting the new bushing thru the sway bar,  you can stitch weld
the bracket , back together, around the bushing.

Neil Vedder 


*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

--- Begin Message ---

• From: Bryan Scott <scott1990@xxxxxxxxxxxxxx>
• Date: Sat, 4 Oct 2008 15:19:03 -0400

Hi All,

 

I'm trying to remove the front sway bar on my 58 Fireflite.  I'm having trouble on the driver's side where it connects with the bracket.  Is there a trick to separating it from the bracket?  It doesn't look like it needs a special tool, does it?  Any advice would be appreciated.

 

Thanks!

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

--- End Message ---