Re: [FWDLK] 315 vs 325??

[DupontTim@xxxxxxx]

It sounds to me like someone is confused a D500-8181 would be consistant with a 1956 D500 engine, the casting number on the block would be correct for both years of Dodge engine D500s it should have a date on it as well. I have a 58 Coronet engine with the same casting number and it is a poly, so the ID number is the key. A 354 engine would not have that casting number, hope this helps Tim

 

In a message dated 10/8/2008 2:37:12 P.M. Mountain Daylight Time, debensonii@xxxxxxxxxxx writes:

So it is a 354, and not even a 325 or a 315?

debenson2
431056
Brooklyn Park, Minnesota 55443 USA
debensonii@xxxxxxxxxxx road2recovery.us
763/438/6671

     D-500 8181 - This is a D500 made in Detroit.  8181 is probably the numerical sequence of this engine in the D500 production.  According to my references, this is only a 354 cid engine 
     

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

---

New MapQuest Local shows what's happening at your destination. Dining, Movies, Events, News & more. Try it out!

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1