Re: [FWDLK] TRANS COOLING LINES
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] TRANS COOLING LINES



If 'you' do install an external trans cooler, the air-cooled (finned) torque converter will provide even more
cooling effect, which is a good thing.

My car is at a transmission rebuilder, presently, and I don't yet have a postmortem on the failure of its retrofitted liquid-cooled trannie/system (which has the OEM cooler installed in the radiator's bottom tank), but, its replacement
T/Q will be a finned  (air-cooled) unit.

Back when (10+ years ago) I changed the trannie to a liquid-cooled unit, I had the liquid cooled (non-finned) T/Q modified internally for higher stall speed (less creep, in Drive ) , and that resultant higher heat generated might have been a contributing factor in the loss of forward gears that I reported upon, a couple months ago.

Trans-X appears to have life-supported  the trannie, for  about  a month.

The new finned T/Q will just be left, set-up for Stock operation, and I will pussy-foot the car, now, as the $2K(+) O/H
will not be fun to pay for.

Neil Vedder




Jason Rogers wrote:
By all means do NOT plug those cooling port lines from the tranny!  They are there for a reason and need to be utilized - such as how others suggested getting an aftermarket cooler to put in front of, or behind, the radiator (I say behind because, if that cooler is the only source of oil cooling, it need not be exposed to frigid air temperatures and thus overcool the tranny...but our cars tend to be fair weather cars so putting the cooler in front of the radiator wouldn't hurt.)

That vintage of transmission did not have a locking torque converter clutch, so there's always a level of slip within the torque converter.  Slip, under propulsion, creates heat - and can create high oil temperatures very fast.  Yes, the earlier transmissions were air-cooled, but I speculate that the automakers learned about the need to keep the oil cooler - and that combined with ever more heavy cars and more powerful engines, they said, "hmm...looks like we need to have a more reliable means of cooling our trannys than with air fins."

Jason.

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1


*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.