Re: [FWDLK] QUESTION FOR YOU.....

[Phil Maniatty <pmaniatty@xxxxxxxxx>]

I had a not so great experience with him.  I bought my rocker panels from him after he promised me that they had the slight curvature on the part that is visible beneath the door.  The ones he sent were flat as a pancake and I wound up having my restoration guy put the curve on them ($$$).  They also had to be reworked in other ways to make them fit properly.

--- On Sun, 10/25/09, Bryan & Carolyn Scott <scott1990@xxxxxxxxxx> wrote:

> From: Bryan & Carolyn Scott <scott1990@xxxxxxxxxx>
> Subject: Re: [FWDLK] QUESTION FOR YOU.....
> To: "Phil Maniatty" <pmaniatty@xxxxxxxxx>, L-FORWARDLOOK@xxxxxxxxxxxxx
> Date: Sunday, October 25, 2009, 3:52 PM
> Here's a lead that comes recommended
> to me:
> FRANK LAIACONO
> 29120 BADELT
> WESTLAND,MI
> 48185
> ClassicParts4U@xxxxxxx
> 
> Bryan
> ----- Original Message ----- 
> From: "Phil Maniatty" <pmaniatty@xxxxxxxxx>
> To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
> Sent: Sunday, October 25, 2009 1:56 PM
> Subject: Re: [FWDLK] QUESTION FOR YOU.....
> 
> 
> >I understood Ron's inquiry to be about metal structural
> panels.  Mike, is 
> >your answer based on an understanding of Ron's inquiry
> to be about trunk 
> >mats and vertical fiberboard side panels along the
> inside of the trunk?
> >
> > --- On Sun, 10/25/09, Mike Squires <squires1fam@xxxxxxxxxxx>
> wrote:
> >
> >> From: Mike Squires <squires1fam@xxxxxxxxxxx>
> >> Subject: Re: [FWDLK] QUESTION FOR YOU.....
> >> To: L-FORWARDLOOK@xxxxxxxxxxxxx
> >> Date: Sunday, October 25, 2009, 1:08 PM
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >>
> >> Ya I do, Gary Goers...He made me a set for my
> >> '56 Ddoge Custom
> >> Royal which were very well done and fit
> >> perfectly!
> >>
> >> Mike Squires
> >>
> >>   ----- Original Message
> >> ----- 
> >>   From:
> >>   Archangel1390@xxxxxxx
> >>
> >>   To: L-FORWARDLOOK@xxxxxxxxxxxxx
> >>
> >>
> >>   Sent: Sunday,
> >> October 25, 2009 7:57
> >>   AM
> >>   Subject: [FWDLK]
> >> QUESTION FOR
> >>   YOU.....
> >>
> >>
> >>
> >>   Does anybody know who make
> replacement trunk
> >> panels
> >>   or trunk patch panels for a 55,
> 56 Plymouth or
> >> 55,56
> >>   Dodge?
> >>
> >>   Ron
> >> Swartley
> >>
> >>   *************************************************************
> >>   To unsubscribe or set your
> >> subscription options,
> >>   please go to
> >> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
> >>
> >>
> >>
> >>
> >>
> *************************************************************
> >> To unsubscribe or set your
> >> subscription options,
> >> please go to
> >>
> >>
> >> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
> >>
> >>
> >
> >
> >
> >
> >
> *************************************************************
> >
> > To unsubscribe or set your subscription options,
> please go to
> > http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
> > 
> 
> 


      

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1