Re: [FWDLK] Ignition wire holders
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Ignition wire holders



Plastidip.

 

 

Owen

 


From: Forward Look Mopar Discussion List [mailto:L-FORWARDLOOK@xxxxxxxxxxxxx] On Behalf Of Ron Waters
Sent: Wednesday, 5 May 2010 1:48 p.m.
To: L-FORWARDLOOK@xxxxxxxxxxxxx
Subject: Re: [FWDLK] Ignition wire holders

 

Nick -

 

There is a dip that is commonly available (Home Depot, etc.) that is used for rubber coating tool handles. That's what I used. Took me a little while to get the look I wanted, but they look great when done right.

 

Ron

----- Original Message -----

Sent: Tuesday, May 04, 2010 9:23 PM

Subject: [FWDLK] Ignition wire holders

 

On the v8 I have for my 56 Plym, on top of the valve covers are some holders to hold the spark plug wires. They look to originally have had some rubber coating or something on them to keep the holders from wearing through the wires.

 

So....What are you folks doing for that or are you just stripping and painting them and using them with no coating?

 

Thanks,

Nick

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.