Re: [FWDLK] Oil Pump Shaft Stuck
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Oil Pump Shaft Stuck



A brass drift and a big hammer, hit square so you don't bugger it up.

Mike

At 04:33 PM 7/16/2010, Ron Waters wrote:
Hi Gang -

The Oil Pump and Distributor Drive shaft (Part no. 1323369) from my
59 Dodge 326 (like a 318) is stuck. The engine is completely disassembled
and the block has everything removed from it, except this gear and shaft
assembly. It's jammed into its bore and won't come out, even when I tap it
from below (where it would attach to the oil pump.

Can anyone suggest a way of removing this shaft ?

Thanks,

Ron

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1



Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.