Re: [FWDLK] Tubes

[William Huff <whuff@xxxxxxxxxx>]

I know it's not stock, but I have used exhaust pipe of the proper 
size for odd bends I couldn't buy or make in radiator hoses 
before.  That way the hose portions are mostly straight.

Bill Huff


At 10/28/201011:02 PM, Jan & Roger van Hoy wrote:
> I've got a question for you '56 Plymouth guys, it the lower hose to 
> the heater valve a specially formed hose?  I tryed to use regular 
> stock hose and it woudn't bend sharply enough, had to use a lot 
> longer piece to get it to curve.
>
> --Roger van Hoy
>
>
> ----- Original Message ----- From: "Matt Proske" <mproske@xxxxxxxxxxxxx>
> To: <L-FORWARDLOOK@xxxxxxxxxxxxx>
> Sent: Thursday, October 28, 2010 5:10 PM
> Subject: [FWDLK] Tubes
>
>
> > As shown in the image, mine has the bent tube on bottom.
> >
> >
> > *************************************************************
> >
> > To unsubscribe or set your subscription options, please go to
> > http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
>
>
> --------------------------------------------------------------------------------
>
>
> > Matt
> >
> > Mobile
> >
> > *************************************************************
> >
> > To unsubscribe or set your subscription options, please go to
> > http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
>
>
> --------------------------------------------------------------------------------
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.448 / Virus Database: 271.1.1/3223 - Release Date: 
> 10/27/10 19:12:00
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1