[FWDLK] 1957 Dodge push button starter switch
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[FWDLK] 1957 Dodge push button starter switch



Hi All,
 
   Another successful repair.
 
   I was able to remove the push button control module and cable quite easily. My initial fears were I would need to manually adjust the control cable if I unhooked it. When I checked the micro starter switch using the ohmmeter it checked out fine. So I put the module back in, after I bent the tang to push the button in just a little bit more. When I put the battery on and tried starting it was sporatic. Not reliable!! I ended up replacing the switch with an NOS I found on Ebay. I drilled it out and secured it with some small machine screws and nuts. So far so good. 
 
  Thanks again to all for your expert help. I'm a happy camper.
 
 Now, I'm going to work on a squeaky torsion bar.I think. It's quite annoying riding along in the convertible, squeak! squeak! squeak!. Any suggestions.
 
 Till next time,
 
 Brad Werner   '57 Dodges

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.