|
Ed:
You will have to make the
brackets. They came with the mirrors. I bought a set of NOS mirrors
and the brackets and screws were no where to be seen. I made my
own from aluminum so they do not rust and used stainless steel
screws. I doubt that there are any part numbers for these.
John Teske
In a message dated 1/13/2011 1:09:54 P.M. Eastern Standard Time,
eddee@xxxxxxxxxxxxx writes:
HELLO
MEMBERS
Does anyone know of availability of the tiny fender mounted
mirror
brackets that screw into the fender , while under the
mirror??
Certainly can make one,, but if anyone knows a part number or
if any are
laying around loose,,pls advise
These are the little
right angle brackets approx 3/4" long X 3/8" high
THANKS TO ALL
ED
ECKERSON
LI
NY
*************************************************************
To
unsubscribe or set your subscription options, please go
to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
*************************************************************
To unsubscribe or set your subscription options,
please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
|
Back to the Home of the Forward Look Network