Re: [FWDLK] Exhaust manifold question
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Exhaust manifold question



The 277 exhaust manifold may bolt up to the later poly's, but the size of the openings may be smaller.  My 25 Fury called for an exhaust manifold that very few seem to be able to find.  It apparently was cast and installed on truck engines rather than passenger vehicles.  If you need large capacity exhaust, I would look elsewhere.
 
    John
 
In a message dated 1/29/2012 3:17:23 P.M. Eastern Standard Time, AdamL57@xxxxxxx writes:
It should fit, the differences in the early and late poly's is the crank and bore and stroke.
Adam
 
In a message dated 1/29/2012 2:18:04 P.M. Eastern Standard Time, drt-rdr@xxxxxxxxxxx writes:
Anyone see a problem using a 277 exhaust manifold on a 64 poly 318?

Nick

Sent from my Verizon Wireless 4G LTE Phone


-----Original message-----
From: Eastern Sierra Adjustment Svc <esierraadj@xxxxxxxxxxx>
To:
L-FORWARDLOOK@xxxxxxxxxxxxx
Sent:
Sun, Jan 29, 2012 19:12:41 GMT+00:00
Subject:
Re: [FWDLK] PARTS FOR US,,,care of chebbies!!

ED, can you post up some images of these parts, or PM me with
their page jay-pegs, & I'll post them here, for you.

Neil Vedder





On 1/29/2012 6:10 AM, eddee@xxxxxxxxxxxxx wrote:
> HELLO MEMBERS!!
>
> Just passing along something that I came across
>
> CORVETTE CENTRAL------in looking thru their ctalog,,there are some NEW > PARTS that we can use for our mopars!!
> NOT CHEAP!!-but new !!
>
> ------------------------------------------------------------------------------------------------------------------------------------------ >
>
> ANTISTAT CAPACITORS for generator,,,voltage regulator and coil!!-- > almost identical to ours
> OIL FILLER TUBE CAPS--IDENTICAL!!
> BALLAST RESISTERS--almost identical to ours
>
> HAVE FUN
> ED ECKERSON
> LI NY
>
> *************************************************************
>
> To unsubscribe or set your subscription options, please go to
> http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1
>

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.