[FWDLK] '59 Belvedere powerflite trans problem
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[FWDLK] '59 Belvedere powerflite trans problem



Hi all, my name is Don Haddock and I’ve followed the list for years. I have a problem with rebuilding my powerflite transmission. It started a couple years ago when I went to the 2013 Michigan National Plymouth Owners Club meet. When I would start off from a stop I would get a shudder as if a brake was grabbing. It gradually kept getting worse and I eliminated all but the trans. I finally pulled the trans and tore it down and other than being dirty I found no problem. My problem now is after installing it ,I lost pressure causing a delay going in gear. I found the front pump gear had worn into the front valve body which is just behind it. I figured I must have assembled that front pump area incorrectly. I got a new front pump and valve body and re-assembled the trans again. I was very careful to make sure the pump drive sleeve was aligned properly with the torque converter when installing it. After a few minutes of running the engine and filling the trans and a short ride, it is now doing the same thing again. My question is “What is causing this to happen ?” Am I doing something wrong? Can the torque converter be at fault? Any help will be greatly appreciated. I am in New Hampshire and I’m sure I’ll need another Valve body and possibly the front pump. Help

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

Help The Forward Look with every Amazon purchase by clicking here!
Help the Forward Look with every eBay purchase by starting your search here!




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.