Re: [FWDLK] Lighting Issues
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [FWDLK] Lighting Issues



Disconnect the 2 wires coming off the brake light switch on your master cylinder  and join them together,  if your brake light then work , you have a bad sender...if not then look further into the lighting switch or directionals.

From: Forward Look Mopar Discussion List <L-FORWARDLOOK@xxxxxxxxxxxxx> on behalf of Larry Ashbaugh <000003991ab8a71e-dmarc-request@xxxxxxxxxxxxx>
Sent: Monday, August 24, 2020 11:23 AM
To: L-FORWARDLOOK@xxxxxxxxxxxxx <L-FORWARDLOOK@xxxxxxxxxxxxx>
Subject: [FWDLK] Lighting Issues
 
I have a 59 Dodge Coronet which I am having a lighting problem with:  The turn signals work, but tail lights and stop lights do not.  Since I think the turn and stop lights both work off of the same filament, and just to ensure that it's not the bulb (1157), when I saw the problem, I replaced the original bulbs.  No change.

Could it be the contact of the brake light sensor (it has the hydraulic pressure switch on the brake reservoir)?

Thanks for your thoughts....

Larry

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

Help The Forward Look with every Amazon purchase by clicking here!
Help the Forward Look with every eBay purchase by starting your search here!

*************************************************************

To unsubscribe or set your subscription options, please go to
http://lists.psu.edu/cgi-bin/wa?SUBED1=l-forwardlook&A=1

Help The Forward Look with every Amazon purchase by clicking here!
Help the Forward Look with every eBay purchase by starting your search here!




Home Back to the Home of the Forward Look Network


Copyright © The Forward Look Network. All rights reserved.

Opinions expressed in posts reflect the views of their respective authors.
This site contains affiliate links for which we may be compensated.